Uses: Low voltage, high sensivity.
Main applications: Electronic printed circuit. This pressure switch is more sensible than snap action models and can be calibrated at lower pressure values. Very small differential.
Membranes: EPDM, dia 22 mm. Silicone or NBR on request.
Fluid: water or air.
Housing: PA66, UL94 VO.
Contact: single pole normally closed, slow break.
– Silver contact: max 1A 250V
– Gold plated contact: max 100 mA, 24V
Action: momentary, open on pressure rise.
Set point calibration: factory calibrated and sealed, not field adjustable.
Set point calibration limits: standard calibration 50mbar, other values are achievable from 20 to 400 mbar.
Electrical connection: printed circuit terminal, dia 1.2 mm, 15 mm spacing.
Maximum pressure: 2 bars (29 PSI).
Ambient temperature limits: 0 to 85°C.
Available pressure inlet fittings ①
References (with calibration at 50 mbar):
|Silver contact||Gold plated contact|
|M10 x 1||ZE2X1ML105000000||
Snap in fitting, 2 grooves dia 7.8
|Snap in fitting, 1 groove dia 10||
|Snap in fitting, 1 spout dia 6 mm||ZE2X1AL105000000||
Other set point values: replace 050 in the product reference by the requested value in mbar.