Type: Y260 Heat tracing accrssories

This box allows to connect, with a good IP66 ingress protection, 2 round or flat heating cable to a round power
cable or providing at the same time the continuity of the power line.
Terminal positions provide easy access, wiring is simple, including for braided heating cables.

                                                                                         Main features
Material: Polyamide 66 black, 90mm x 67mm x 36mm. Good UV resistance.
Waterproof grade: IP66.
Mounting: 2 removable wall mounting brackets, hole distance 96mm. Pipe mounting with cable tie also possible.
– Screw terminals with captive toothed square washers accepting bare conductors.
– Wire gauge: 3 x 1 mm² to 3 x 2.5mm².
– Maximum permissible intensity: 16A 250V.
Cable clamping: with M24 cable glands, with silicone gaskets.
– Maximum diameter of round cables: 8 or 10mm depending of gaskets used.
– Size limits of flat cable outputs: from 10 x 3 to 13 x 6mm.
(Comes with a set of different diameters).
Excellent cable retention by stainless steel saddles at the 3 ends.
Sealing: supplied with 5 red plastic ties for use in the sealing holes.
Easy assembly: Assembly is made with full access to terminals when cover is removed.
Reference: Y260SS


2D&3D Drawing