Type: Y24 2 ways connection block for heat tracing


This box allows to connect end-to-end, on field, a round or flat heating cable to a round power cable. However, it also makes it possible to connect together two round cables or two flat cables. The internal connection terminal block is in ceramic.

Main features

Material: Polyamide 66 black, total length 93mm. Good UV resistance.

Waterproof grade: IP66


– By 2 side brackets for wall mounting for 4 mm diameter screws, 35mm between axis.

– On the tube by a nylon tie. The lower part is concave to facilitate this assembly and the oblong holes of the legs allow the passage and holding of a cable tie.

Terminal block:

-High temperature ceramic with screw terminals with captive toothed square washers accepting bare conductors

– 3 conductors, from 0.5 to 2.5mm²

– Maximum permissible intensity: 16A 250V

Cable clamping: with M24 cable glands, with silicone gaskets

– Maximum diameter of round cables: 12,5mm

– Size limits of flat cables: from 10 x 3 to 13 x 6mm

(comes with a set of different diameters).

Excellent cable retention at both ends.

Easy assembly: it is possible to slide the ceramic terminal block out of the body to connect the cables outside of it


2D&3D Drawing