Applications:

Pipes surface temperature control in usual industrial applications and environments, to control 3 pole heating circuits (No suitable for hazardous areas)

Internal adjustment is convenient for products that must not be frequently adjusted.

Housing: Aluminum, IP65, IK10. Grey RAL7032 epoxy painting. Stainless steel captive cover screws. Captive aluminum lid.

Set point adjustment ranges: :  0-60°C (32-140°F); 0-90°C (32-195°F); 30-90°C (85-195°F); 30-110°C (85-230°F);

Set point adjustment:  By °C printed knob. All types have an adjustable rotation limit system located inside the knob that allows reducing the set point adjustment span. Types with external adjustment have a transparent window. This device allows seeing the pilot light and the knob position.  °F values are available as an option

Action: Temperature control, On-Off action 

Sensing element: Liquid expansion bulb inside aluminum bracket in contact with the pipe surface.

The bracket design provides optimized thermal contact with 34 mm (1 “, DN25),  60 mm (2″, DN50) et 90 mm (3”, DN80) outside diameter tubes. For intermediate sizes, we recommend the use of thermal grease

Electrical connections:  Inside, on screw terminal connection block

Earthing:  External screw terminal.

Cable input and output: Two M20 cable glands, Black PA66.

Mounting: The thermostat housing can be fixed on the pipe by worm drive hose clamps (DIN3017) , nylon cable ties (Tie wraps upon EN50146, for applications at  permanent temperature lower than 85°C),  or specific stainless steel punched band  (see accessories at the end of this catalog)

Identification: Metallic identification label, riveted.

Contact: 3PST, open on temperature rise

Electrical rating, resistive loads:

16A 250V, 50 ~60Hz: >100000 cycles,

20A 250V, 50 ~60Hz: ≥ 50000 cycles,

10A 400V, 50 ~60Hz: ≥ 50000 cycles.

Minimum storage temperature: -35°C (-30°F)

Maximum ambient temperature: 60°C (140°F)

For more technical information see 8C thermostat technical data sheet

Main references

°F printing: replace last character (J) by K