Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, types Y06 (With ½”BSPT nickel plated brass pocket) and Y07 (AISI 304 pocket, ½”BSPP)

Main applications:

Temperature control and safety on storage water heaters, solar heating tanks, boilers

Housing: IP54, 105 x 88 x 58.5 mm, (Cap, accessories and cable gland not included), black PC-ABS, UL94V0. High impact and UV resistance.

Product including an adjustable temperature control thermostat and a fixed setting high limit manual reset thermostat. Manual reset has access from outside, by removing a cap.

Electrical input: two M20 cable glands.

Temperature Adjustment: Inside, with °C printed knob. (°F printed knobs available in option)

Sensing element: Liquid filled bulb, located inside a backside mounted nickel plated brass pocket.

Adjustment ranges: 0-60°C (32-140°F) ;  30-90°C (85-195°F); 30-110°C (90-230°F)

Pocket length (L): 205mm (standard), 170, 300, 450 and 600mm on request

Electrical connections:  screw terminals

Mounting:

-Y06: by the ½”BSPT (taped) brass pocket fitting

-Y07: by the ½”BSPP (parallel) brass pocket fitting

Control thermostat contact: SPDT

–Open on temperature rise contact (C-1) 16A(2.6) 250VAC

-Close on temperature rise contact (C-2) 6A(0.6) 250VAC

-Electrical life >100.000 cycles.

Manual reset thermostat contact: Failsafe, open by temperature rise; 16A (2,6) 250V alt.

Options:

-Power supply “energized” pilot light (Neutral is mandatory, and thermostat contact is open on rise only, not SPDT). Other pilot light wirings are possible on request.

-Liftable adjustable high end adjustment on control thermostat.

– Outside access to the control thermostat adjustment (By removing a 40mm dia. cap)

-Thermal cut out incorporated inside the pocket.

-These products can be made without pocket, for special customer applications and incorporation