Applications

Detection of a temperature value in liquids, water, hydraulic oils, thermal oils. Two versions of electrical contacts: Gold-plated for low power circuit, like PLC or 2A 250V for relay coils or resistive circuits.

Main features

Probe material: 304 stainless steel sheath diameter 10mm, with AISI 304 fitting.

Calibration temperature: 50 to 120°C（100 pcs MOQ applicable for specific values).

Tolerance on the opening temperature: ± 5°C

Fittings: 1/2 “BSPT (tapered) or M14x150 with gasket seat.

Immersed length (L1): Standard 90mm and 170mm (50, 230, 300mm on request)

Protection: IP65, IK10.

Pressure resistance: 25 bars.

Part sensitive to temperature: Located at the end of the sheath, on 35mm.

Contact: open by temperature rise. (Close on temperature rise possible on creep action models)

Electrical rating:

– PLC temperature alarm version: gold plated silver contact, creep action, 8A resistive in 12V/24V DC 60,000 cycles, differential less than 2°C.

– Thermal safety version: snap action silver contact, 2A, 250VAC, 100,000 cycles, differential higher than 10°C.

Cable outlet: 17x55mm PA66 overmolding.

Connection: H05VV F, 2 x 0.75 mm² cable, standard length 1m. (Connectors on cable end possible on request)

Main references with 1 meter cable (L2)

Other rod lengths, replace E090 or E170 by E followed by rod length in mm (MOQ apply).

Other cable lengths, replace H10 by H followed by cable length in dm (MOQ apply).